Home · Machines

DEPL Brand · Made in Sri Lanka

Feed mill machines, built in one workshop

Pellet mills, hammer mills, mixers, coolers, elevators and the parts that join them. Capacities from 1 to 40 t/h, with a 2-year warranty.

Machines

Every machine in a feed mill, made by one workshop

Buy a single machine to upgrade your plant, or let us supply a complete line where every part is designed to work together. Ask us for the specification sheet of any model.

DEPL Pellet Mill2–30 t/h

Pellet Mill

Ring-die pellet mills for poultry and cattle feed, with conditioner and feeder.

Request specifications
DEPL Hammer Mill2–15 t/h

Hammer Mill

Grinds maize, soybean meal and other raw materials, fed by a VFD-controlled rotary feeder.

Request specifications
DEPL Paddle Mixer1–30 t/h

Paddle Mixer

Single and double shaft paddle mixers for fast, even batch mixing, with liquid and oil dosing options.

Request specifications
DEPL counterflow pellet cooler2–30 t/h

Counterflow Cooler

Cools and dries hot pellets straight from the pellet mill, with cyclone dust collection available.

Request specifications
DEPL roller crumbler2–30 t/h

Roller Crumbler

Breaks pellets into crumbles for broiler starter feed, with hand-wheel roll gap adjustment.

Request specifications
DEPL bucket elevator

Bucket Elevator

Bolted bucket elevators with inspection doors and boot clean-out, sized to the tonnage of your line.

Request specifications
DEPL screw conveyor

Screw and Chain Conveyors

U-trough and round screw conveyors, screw feeders and chain conveyors for intake and transfer.

Request specifications
DEPL sifter, cleaner and magnet

Sifter, Cleaner and Magnet

Rotary sifters, raw material cleaners and drum magnets to remove stones, strings and metal before grinding.

Request specifications
DEPL stock and scale tanks

Stock and Scale Tanks

Bolted stock tanks, weighing scale tanks and batching systems with level sensors and jack gates.

Request specifications
DEPL pellet mill dies and spare parts

Pellet Mill Dies and Spare Parts

Dies, rollers, hammers, screens and bearings, kept in stock in Sri Lanka for quick replacement.

Ask for a part
DEPL automation systems

Systems that cut labour, waste and power cost

These are systems DEPL has designed for Sri Lankan feed mills. Each one can be added to a new line or fitted to an existing mill.

01
Complete plant

Fully automatic feed and pellet plant

Automated raw material intake, two hammer mills and two pellet lines. Designed for 30 t/h mash and 40 t/h pellet feed, with 200 t finished feed storage and bulk truck loading.

02
Batching

Automatic batch weighing

Each stock tank feeds its own scale tank through a HIGH (fast) and a LOW (fine) screw feeder. The HIGH feeder stops just before the set weight and the LOW feeder tops up, so every batch is accurate.

03
Intake

VFD intake with material selection

The operator selects maize, soya, poonac or rice on the panel and the VFD rotary feeder runs at the right speed for it. Automatic doors fill the correct stock tank and level sensors stop the feed when it is full.

04
Dosing

Oil and liquid dosing line

Oil is weighed in its own scale tank through pneumatic high and low valves, then pumped into the mixer. The supply tank refills itself at low level.

05
Dosing

Chemical and premix dosing

Powder chemicals and premix are weighed on a separate scale and added to the batch, keeping micro-ingredients exact.

06
Environment

Cooler dust collection and air cleaning

Cooler exhaust passes through cyclones, a bag filter dust room and a wet scrubber before the chimney. Scrubber water is treated and reused.

07
Energy

Feed Mill Power Saving System

Grid power, solar and generator are combined section by section with automatic changeover. The generator runs only to cover a shortfall, which cuts fuel cost without batteries or a grid connection.

08
Monitoring

DEPL Machine Care app

Operators log motor amps, running hours and daily production on their phones. The app flags fault and overload readings early, so problems are fixed before a breakdown.

09
Transport

Bulk feed truck body

Four-chamber box tank with a V-bottom and a full-length screw driven by the truck's PTO hydraulic motor. It unloads straight into the farm's intake hopper.

How a DEPL line works

Ten steps from raw grain to finished feed

  1. IntakeTruck or bag unloading into the intake hopper
  2. CleaningRotary cleaner, sifter and magnet
  3. StorageRaw material stock tanks
  4. GrindingHammer mill with VFD feeder
  5. BatchingScale tanks weigh each ingredient
  6. MixingPaddle mixer with oil and premix dosing
  7. PelletingConditioner and pellet mill
  8. CoolingCounterflow cooler with cyclone
  9. CrumblingRoller crumbler for starter feed
  10. PackingBagging scale or bulk loading

Tell us the machine and the tonnage

We reply on WhatsApp, usually within one working day.